+86-571-85397237

Vinyl plank flooring produced by SINOCEILING company is a durable, easy-to-install choice and is very affordable cost, which has been widely installed in ligh commercial or residential applications. When you're ready to begin the installation, follow these steps:

1. Spread adhesive over an area of the floor, beginning at your crossing center lines. Typically, you might apply glue to a quadrant of the room, but bear in mind the working time of the adhesive if the room is very large.

2. Apply the adhesive evenly, holding the trowel at a 45° angle. Take note if the instructions call for a drying time before placing the flooring.

3. Starting at your lines, begin gluing down the vinyl flooring. Place the planks tightly together to eliminate gaps. Stagger the lengths randomly or as directed.

4. Firmly press each plank as you install it to bond it firmly to the floor.

5. As you reach the wall, cut planks to the appropriate length and install the pieces.

6. Wipe away any excess glue on the surface of the planks using mineral spirits and paper towels.

7. When completed, roll the floor with a non-marring floor roller to press out any air pockets and ensure a good bond. Give the adhesive a few hours to cure before walking on it.